Arturia ARP2600V Manuel d'utilisateur télécharger pdf (Page 12)

12 ARTURIA – ARP2600– USER’S MANUAL

Change the brightness of the sound

! In the same manner, you can change the range of oscillator 1 by setting the “Range”

selector to one of the values expressed in steps: LF = low frequencies, 32’ = -2

octaves, 16’ = -1 octave, 8’ = standard tuning, and 4’ = + 1 octave.

Setting the range of oscillator1

By performing these first settings, you have already modified the preset “JMB_Simple1”.

You will now see how to save the sound that you have created.

! To choose another destination for the sound, click on the “Save as” icon and choose

the location. For example select “new” in the choice of bank. Two new banks, sub

banks and a preset are immediately created. The names “new bank”, “new sub

bank…” and “new preset…” appear in their respective displays.

! Click on each of these displays to rename the 3 parts.

Saving a preset

To save a user preset (“Users”), click on the “Save” icon in the toolbar: The new settings

will be saved in the current preset without changing the name (but if the selected preset

is one of the “factory” presets, the factory setting will not be overwritten).

It is important to specify that changing the name of a preset does not create a new one! Only

the name of the current preset will be changed.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 96 97

Pas de commentaire

Arturia ARP2600V Manuel d'utilisateur Page 12